
A dream kitchen renovation can turn stressful quickly when the centerpiece of the room is suddenly part of a safety recall. About 3,992 high-end AGA and La Cornue dual-fuel ranges sold in the United States are included in the newly announced AGA Rangemaster recall, with another 336 units sold in Canada. According to Justia’s reproduction of the September 10 recall notice, affected ranges may be missing a cap from a gas test port, potentially allowing gas to leak and creating a fire or explosion hazard.
The ranges sold for roughly $6,000 to $20,000, making this more than a routine appliance problem for homeowners building an expensive kitchen around one. If a DIY renovation is on your weekend schedule, checking the range before moving, reconnecting or building cabinetry around it should now be near the top of the list.
Which High-End Ranges Are Included In The Recall?
The AGA Rangemaster recall covers AGA Elise and Mercury Series freestanding dual-fuel ranges in 36 and 48-inch widths, along with La Cornue CornuFé Series ranges in 36 and 43-inch widths. The affected model numbers are AEL361DF, AEL481DF, AMC36DF, AMC48DF, LAC9 and LAC1, according to Recall Weekly’s detailed recall report. They were manufactured between March 19, 2025, and July 24, 2026, and sold through authorized appliance dealers nationwide from March 2025 through July 2026.
The recall includes all colors and trim options as well as ranges configured for natural gas or LP gas, so appearance alone cannot tell you whether yours is affected. Owners should instead find the model and serial number on the rating plate located on the bottom panel underneath the storage drawer and verify those numbers through AGA or La Cornue’s recall lookup.
Why A Tiny Missing Part Creates A Serious Problem
What makes the AGA Rangemaster recall unusual is that the defect involves a small component homeowners may never see during ordinary cooking. A missing cap on the gas test port can permit gas to escape, creating the potential for a fire or explosion, as Recall Times reports. The test-port component is particularly relevant during installation pressure testing, meaning homeowners should not assume that an expensive range is automatically safe simply because it looks undamaged or has been operating normally.
No incidents or injuries had been reported when the recall was announced, but that does not eliminate the underlying hazard. This is also why trying to inspect or repair the internal gas components yourself is a poor place to save money during a DIY project.
Stop Before Disconnecting That Range Yourself
Owners of an affected range are instructed to shut off its gas supply immediately and arrange a free inspection and repair by a certified technician through AGA Rangemaster. The good news is that the electric oven sections may continue to be used, while the gas surface burners must remain unused, according to Fresh Recalls’ summary of the official remedy. That distinction matters during a renovation because “dual fuel” means these appliances combine a gas cooktop with electric ovens rather than relying entirely on one energy source. If contractors, painters or cabinet installers will be working around the appliance, tell them about the AGA Rangemaster recall before work starts so nobody inadvertently restores the gas supply. Homeowners should also avoid assuming that disconnecting and reconnecting a gas appliance is just another DIY demolition task, particularly when the appliance already has a known potential leak point.
The Hidden Renovation Cost Could Be Bigger Than Expected
A recalled range can disrupt more than dinner because premium appliances are often integrated into cabinetry, countertops, ventilation and carefully measured kitchen layouts. This Old House’s guide to pro-style ranges notes that these appliances are substantial investments, and their size and installation requirements can influence an entire kitchen design. Imagine spending $15,000 on an affected range, then scheduling $8,000 in new cabinets and countertops around its exact dimensions before discovering that access is needed for inspection or repair; delaying installation could be far cheaper than paying tradespeople to undo finished work.
Fortunately, the recall remedy itself calls for a free inspection and repair by a certified technician, so owners should contact AGA Rangemaster before paying an independent company to address the recalled component. Before renovation day, ask three practical questions: Is my serial number affected, has the recall repair been completed, and will technicians need access that new cabinetry or flooring could obstruct?
Check The Appliance Before The Demolition Begins
The larger lesson from the AGA Rangemaster recall is that checking recalls should become part of the pre-renovation checklist, right alongside permits, measurements, utility shutoffs and contractor schedules. A premium price is not a guarantee against manufacturing defects, and in this case ranges costing as much as $20,000 are affected. Owners can use the manufacturer’s AGA recall lookup or La Cornue recall lookup and contact the AGA Rangemaster recall line at 888-257-7912 if their appliance matches the affected models. Taking a few minutes to verify an appliance before demolition could prevent a safety risk, avoid unnecessary rework and keep an expensive renovation from becoming even more expensive.
Would you think to check your major appliances for recalls before starting a renovation, or is this something you have never added to your project checklist? Share your experience and thoughts in the comments.
What to Read Next
The $500-a-Month Backyard: Are Pools, Hot Tubs and Outdoor Kitchens Worth What They Cost?
5 Kitchen Appliances That Can Add Up to $5,000 in Perceived Home Value
6 Kitchen “Icks” That Could Hurt Your Home Sale (Buyers Notice Immediately)







Leave a Reply